Napa Auto Parts or automotive paint and body supply stores.

 

Based on your pictures these look correct:

http://m.ebay.com/itm/15pcs-White-P...-Push-Type-Bumper-Defender-Hood-Fastener-Clip-for-Jeep-/131725163718?nav=SEARCH

 

These are the correct clips http://www.bamwholesaleparts.com/je...y-cat/exterior-trim-rear-door-scat/?part_name=body-side-mldg-clip&position=left

 

I ordered 20 clips a few months ago.
It's a standard molding clip for the all exterior trim but for some reason they just show it on the exterior rear door trim left.

 

6824 1251 aa

 

The Jeep Dealer charges $2 per clip

 

That's crazy seeing as they probably cost a few pennies to make. Anyways, not that big of deal, haha. Just the manufacturer in me. Probably the cheapest replacement I'll ever make on it

 

Hmmm... Looks like you can get them for $0.20/pc here if you buy 50 (I've got to verify that these are the right dimensions first, left my calipers at work). Might be worth it to keep some handy in case I break some more.

 

These are the right dimensions.

Here is the link if anyone else needs these:

http://m.dhgate.com/product/1629-quality-plastic-clamp-anti-rub-snap/212937741.html

 

We should sticky this! Also I wonder if anyone will start making fender flares for this Jeep

 

Madness does but they haven't released them yet and I plan to snatch up a pair when they do.

 

☹☹☹ shipping from HK?? That's about a week and a half out. I'm going to the dealer this morning and hoping they have some.. Right fender is being held with a zip tie ? Perhaps I'll order a bag of these eventually.. I can't get around keeping those clips together. Even my boss who's done body work breaks them. Crap clips

 

Yea if you're on a time crunch then it's not useful, but it beats paying $1 per clip!

 

Update on these fasteners:

I received these a while ago but didn't have time to work on my BU until today.

Pros: They are dirt cheap

Cons: They are difficult to work with

The photo of two fasteners in my hand are from China (left) and the other is factory (right). They are nearly identical. The only difference is the material they are made of.

The China ones are stiff as heck and the factory ones are a little bit more flimsy which they are supposed to so they slip into the holes.

The China ones won't slip into the holes, believe me, I tried and broke a few. I also tried using my heat gin to see if I could soften one up and slide it in but that didn't work either.

Good news, there is a fix. The second photo is a picture of a China one with half the tip cut off. It's the only way to get them to slide in without breaking it or anything else and since the plastic is so stiff it holds just fine once it's in.

Conclusion:

It may or may not be worth it to you to get these. I didn't mind modifying the clips and saving myself $37.

If you only broke 2 or 3 and don't want to wait for shipping from China, it'd be worth the $1/pc to get it from a dealership.

 

Update on these fasteners:




Conclusion:

It may or may not be worth it to you to get these. I didn't mind modifying the clips and saving myself $37.

If you only broke 2 or 3 and don't want to wait for shipping from China, it'd be worth the $1/pc to get it from a dealership.

I got a pack of 10 since I didnt want to wait. I broke 8 of them. And factory ones slide in perfect, so FWIW spend a little more $ and get it done faster. I get a cheaper $ from my company acct, so 10$ was nothing.

 

This is from RetiredGuns post on the renegade ready hitch. Wheel well trim mold clips.

 

Do they actually fit (anyone tested them?) and how much/ where to get them?

 

Where do we get them? Im in for anything that comes in bulk...paying $1 each is gonna get old

 

Which ones are you referring to? The ones I bought you can find earlier in the thread.

 

68241251aa-010 is the 10 pack

 

Check my post too where I found matches on ebay.

 

They should have it in autozone or o'reily

 

I'm looking for a trim fastener on the lift gate. I need the clips that hold the lift gate trim to the body.

 

Rexka 30pcs Rear Door Body Side Molding Clip 68241251AA Compatible with Jeep 15-18 Renegade Chrysler 68241251-AA
On Amazon

 

If the guy above Steve Trailhawk has not yet bought the clips after 3 1/2 years I doubt he ever will

Oh sorry, Welcome Steve

 

I posted it for anyone, like myself that came to this forum to find out where to purchase them.
Thank you

 

Ebay was your first port of call. I commented on this a few months ago

Many topics such as the rear hatch trim removal commented upon it.

More to the point is your reason for posting such an introductory post to say hello. Hey I accept you are trying to help and I am sure everyone is appreciative of that nugget of information.

Do not go all offensive and aggressive just because I pointed out that your link to an old post was 3 1/2 years old.

You could have suggested something like:

Hi all, parts broke whilst removing my trim and I wondered what they were. I found these parts worked from Amazon.

As an introductory post I would be more supportive and appreciative of your assistance for telling us what the problem was and how you fixed it.

It's clear that you are upset but don't be. Make another post