Jeep Renegade Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
32 Posts
You are going to have to remove the driver's door panel and the passenger door panel to find the correct color wire's running to the speakers that are in the door and locate them on the inside, in the kick panel area. I can only say that the wires I have are the same color for the 6x9's just on a different channel of the factory amp I have the 9 speaker system. This was my color code ignore the pin numbers

Left Front Speaker
Woofer Yellow - Yellow/black pin 10-11
Tweeter Yellow - Yellow/black pin 6-7

Right front speaker
Woofer purple/orange - purple/black pin 22-21
tweeter purple/orange - purple/black 9-8

I hope this helps.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top