Jeep Renegade Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
90 Posts
Discussion Starter · #1 ·
I swapped out my OEM filter for the K&N filter. It seems like my air filter box is not closed all the way now. There are 3 screws. I screwed them all in and the one of the front seems to be hard to close. Any pics of the airbox? And is this okay that it seems slightly open
 

·
Registered
Joined
·
35 Posts
The K&N rubber seal might be slightly thicker than stock, I don't have one so I can't confirm. It's a problem if air can get in without passing through the filter but if it's tight enough that it's sealed then it should be fine. Did you contact K&N? It's a pretty new vehicle so they may have the specs slightly off or something.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top