Jeep Renegade Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
359 Posts
Discussion Starter · #1 ·
If any of you with 17" wheels looking to put together a spare tire or just want steel wheels for off-road tires, etc., this is a good one. I bought one to put a spare together and it is a perfect fit - 5x110, 65.1 hub bore and it easily clears the calipers.

Shipped quickly and very well packed in a sturdy box with foam padding.

http://www.ebay.com/itm/NEW-17-5-LU...EE-STEEL-WHEEL-RIM-2444-/361644654162?vxp=mtr
 

·
Registered
Joined
·
359 Posts
Discussion Starter · #3 ·
Here's the finished product. I re-used the bolt and washer that was holding the foam piece in place. I installed the tire with the outside facing down and added the necessary tools:


I then put the JEEP cover back in, but upside down so that the front edge would not interfere when raising/lowering the back seats:


And then the top cover. Done.


With the spare installed with the outside down, I still have a lot of room in the wheel well for more "stuff", if needed.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top