I dreaded doing this but really wanted the finished product so I dove in. Wasn't that bad after all. Got a cheap LED kit with switch and relay on amazon for $30. Watched a ton of videos on YouTube and then started. I ran the wire up from the battery and relay along side the windshield, used silicone to hold it in there. Then up into the rhino rack pioneer platform. The platform has an internal track to run the wires to the passenger side. The wire for the switch runs through the fire wall next to the brake pedal there is a rubber grommet that easily comes out and run wire through it then up into the dash and drilled a hole (YIKES) mounted switch next to factory light switches.