Jeep Renegade Forum banner
1 - 20 of 24 Posts

·
Registered
Joined
·
90 Posts
Discussion Starter · #1 ·
LEDs for Cargo Area and Passenger seats!

Hi guys I visited iJDMTOY today so they could test products on my renegade. They installed Daytime Running Lights (LEDs) and I have no flicker so far as well as no canbus errors. They also replaced my cargo area lights with LEDs and my back seats.
I was talking with the tech who was installing them and the products they will be making are
-HALO lights to replace the headlights (really cool)
-LEDs lights
-Rear Fog lights
-License plate relocation mount for the front plates
and more
Take a look guys! I can get us a group buy discount!


The products should be up soon

http://store.ijdmtoy.com/
Trunk Vehicle Car Automotive lighting Automotive design


Black Car Vehicle Mode of transport Vehicle door


Vehicle Car Trunk Compact mpv Family car
 

·
Registered
Joined
·
90 Posts
Discussion Starter · #6 ·
Cross Posting from other 2 sub topics.

Hi guys I visited iJDMTOY today so they could test products on my renegade. They installed Daytime Running Lights (LEDs) and I have no flicker so far as well as no canbus errors.

I was talking with the tech who was installing them and the products they will be making are
-HALO lights to replace the headlights (really cool)
-LEDs lights
-Rear Fog lights
-License plate relocation mount for the front plates
and more
Take a look guys! I can get us a group buy discount!


Motor vehicle Automotive exterior Automotive lighting Vehicle Car


Headlamp Automotive lighting Automotive exterior Light Bumper


Bumper Automotive exterior Auto part Vehicle Car


Black Car Vehicle Mode of transport Vehicle door


Automotive lighting Automotive exterior Auto part Compact car Vehicle


Trunk Vehicle Car Automotive lighting Automotive design
 

·
Registered
Joined
·
70 Posts
The reflector in the rear bumper is molded for a 194 bulb socket. A dremel and it could be wired into the trailer harness or taillights. If I would have had time when I was installed the hitch retro-fit I would have took my dremel and cut out the back for the socket and wired it into my trailer harness.
 

·
Super Moderator
Joined
·
3,600 Posts
The only LEDs I really want are RED ones for the brake lights. As people i have caravaned/convoyed with have told me that when the sun is low and behind me, it gets dodgy telling if your brake lights are on due to the design of the tail lights.
 

·
Registered
Joined
·
165 Posts
Still no flickering and error messages from the LED DRL? And do they glow for a few minutes after you have turned off the car?
I have tried many different LED bulbs and sooner or later they have all started to cause errror messages.
 

·
Registered
Joined
·
157 Posts
I was wondering how these are working for everyone? I put in LED 194s and they stop working after a week or so ...
I installed the exact same DRLs from this company a few weeks back. No error messages and all working fine. They glowed dimly for a while after turning off ignition but after a day or 2 they now switch off immediately. I would recommend the DRL LEDs for sure.
 
1 - 20 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top