Jeep Renegade Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
81 Posts
Discussion Starter · #1 ·
I created a low profile license plate holder(I use for inspections). I used wall anchors to hold the mount to the grill. Super sturdy and cost 12 bucks to make ! What do y'all think?
Land vehicle Vehicle Car Jeep Headlamp
Automotive exterior Grille Bumper Vehicle Auto part
Automotive tire Automotive exterior Auto part Tire Automotive wheel system


Sent from my Nexus 5 using Tapatalk
 

·
Registered
Joined
·
81 Posts
Discussion Starter · #3 ·
I like it! Where did you purchase the wall anchors and what is the brand? I'd like to do the same thing on my Trailhawk as well.
This is the license plate holder.


I just picked up wall anchors (and washers) from walmart in their hardware section like these. You can find these things everywhere though.
http://www.walmart.com/ip/1-4x3-Togg-Bolt-Anchor-5030/45359920

Just a side note. I picked up a can of flat black rust proof spray paint as well. I dont trust chrome finishes like. Plus i figured flat black would look good against the grill.

Let me know if you have any questions!
 

·
Registered
Joined
·
109 Posts
I created a low profile license plate holder(I use for inspections). I used wall anchors to hold the mount to the grill. Super sturdy and cost 12 bucks to make ! What do y'all think?
[iurl="http://www.jeeprenegadeforum.com/forum/attachment.php?attachmentid=25337&d=1446591079"]
[/iurl][iurl="http://www.jeeprenegadeforum.com/forum/attachment.php?attachmentid=25345&d=1446591098"]
[/iurl][iurl="http://www.jeeprenegadeforum.com/forum/attachment.php?attachmentid=25353&d=1446591118"]
[/iurl]

Sent from my Nexus 5 using Tapatalk
Great idea!
 

·
Registered
Joined
·
74 Posts
Thank you!

This is the license plate holder.
http://www.amazon.com/gp/product/B0013HP98C?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00


I just picked up wall anchors (and washers) from walmart in their hardware section like these. You can find these things everywhere though.
http://www.walmart.com/ip/1-4x3-Togg-Bolt-Anchor-5030/45359920

Just a side note. I picked up a can of flat black rust proof spray paint as well. I dont trust chrome finishes like. Plus i figured flat black would look good against the grill.

Let me know if you have any questions!
 

·
Registered
Joined
·
3 Posts
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top