Workshop Manual
1 - 11 of 11 Posts
Joined
·
157 Posts
As far as I know there is not a 2015 manual available you may have to settle for the 2016 which is now available on CD only.
https://www.techauthority.com/en-us/products/81-370-16028-CD
https://www.techauthority.com/en-us/products/81-370-16028-CD
Joined
·
190 Posts
If I only had a computer with a CD player...
Joined
·
1,193 Posts
It may cost you a few bucks, but you have the option of taking the DVD to a print shop and ask them to print out the manual for you. I prefer paper manuals over looking at a screen. Especially in sunlight.
Joined
·
190 Posts
With previous vehicles for which I had the .pdf manual...
I'd do my search & reading on the screen, then print appropriate pages & take them to the garage.
Laptop only goes to garage to get plugged into OBD port.
One of these days, I'm going to get a big monitor on an articulating arm & a dedicated garage computer.
But today is not that day. Tomorrow not looking good, either.
It looks like it's also available on 'USB' and cheaper, but as I STILL can't post links, you'll need to add your own suffix to the previous link with: 81-370-16028-SUSB
Does anyone know if it covers all engine types or is it US / EU model specific?
Joined
·
190 Posts
Thanks for that.
I'll let you know when I buy it, but that's going to be a month or so...
Hello
Just wondering if you ever managed to source a workshop manual. I have just bought a 2015 1.6 diesel and was looking for one as well, seen your post and wondered if you had any joy.
Cheers
Gordon
Joined
·
157 Posts
As far as I know manuals are only available from
Buy Mopar Approved Service Information
They are only available on CD and USB, no paper or PDF.
The files will only open with Explorer and Explorer must be set as your default browser.
Buy Mopar Approved Service Information
They are only available on CD and USB, no paper or PDF.
The files will only open with Explorer and Explorer must be set as your default browser.
Joined
·
3,318 Posts
I have just had issues with the above post and link.
The page is full of clickbait and once inside I couldn't exit to a normal page and had to shut down the browser before I could get rid of the bait and re-use the forum.
The page asks for your make and model and then stops you on click bait.
This could be an error but perhaps someone else can get the page to work. personally I am erring on the side of caution and wasn't clicking any further links.
The page is full of clickbait and once inside I couldn't exit to a normal page and had to shut down the browser before I could get rid of the bait and re-use the forum.
The page asks for your make and model and then stops you on click bait.
This could be an error but perhaps someone else can get the page to work. personally I am erring on the side of caution and wasn't clicking any further links.
Joined
·
1 Posts
Nothing decent found yet. Bill W
1 - 11 of 11 Posts
