[dozierlaura]

Welcome!

Exactly which parts are you wanting to replace? Small grilles in the bumper, or the main front grille? A photo would be very helpful...

Hi Marek,

I need to replace the small grilles in the bumper

 

[dozierlaura]

Welcome!

Exactly which parts are you wanting to replace? Small grilles in the bumper, or the main front grille? A photo would be very helpful...

I purchased the parts and assumed that they snap into place. I would just like some guidance

 

[dozierlaura]

Well, I've got a 2020 Mopar TechAuthority USB Service Manual. It doesn't specifically show removal/replacement of those grilles. But to replace the front fog lights, it does say to remove the front fascia first. That's the black part below the main grille.
View attachment 2396361011
I imagine how to replace those two grilles would be obvious at that point.

I don't know whether those grilles (and the fog lights, for that matter) might be accessible from underneath without totally removing the fascia...

Well, I've got a 2020 Mopar TechAuthority USB Service Manual. It doesn't specifically show removal/replacement of those grilles. But to replace the front fog lights, it does say to remove the front fascia first. That's the black part below the main grille.
View attachment 2396361011
I imagine how to replace those two grilles would be obvious at that point.

I don't know whether those grilles (and the fog lights, for that matter) might be accessible from underneath without totally removing the fascia...

Thank you so much, this is very helpful. This is more than I could find!

 

[dozierlaura]

Welcome!

See my Post #5 above. It may be possible without taking the bumper fascia off, through the wheel well liner (after taking the front wheels off); but the Service manual doesn't show that.

What my boyfriend did was snap it into place, from the front. Really, with how the grooves are, and the size, I don't see another way to do it. There is no way it could be inserted from behind the bumper.